BIAB Bag for 45cm Diameter Pot
Very Strong BREW IN A BAG (BIAB) bag 72cm x 72cm for pot diameter up to 45cm
I'm a one-man business in England. I'll not try anything unusual, I can barely run the website.
The bags on this site I will post within a day or two as I generally keep some in stock.
If you don't like the bag send it back for a refund, a problem with the bag I will replace or refund
This listing is for the bag only. The boiler is only shown to illustrate how it fits.
Everything is done in the boiler. You mash and boil in the same vessel and there is no sparge. You mash in the pre-boil volume of water, allowing for evaporation and grain loss. When mashing is finished, you remove the bag, let it drain for a few minutes, then set it aside and bring the wort to a boil.
The Polyester mesh is very fine, as can be seen in the photo with the hydrometer behind the mesh. This strong bag is reinforced all around with polyester webbing. This is stitched into the mesh around the top, down the sides and along the bottom of the bag to give excellent lifting strength. The dimensions of the bag have been determined so that they fit on a 45cm dia boiler commonly used by home brewers in the UK. The bag would similarly fit other pots of suitable dimensions. The bag itself is 72cm (45cm dia) wide and there is plenty to fold over the top of the boiler.
Two strong handles are provided for lifting the bag out of the wort. Ideally one would have a hook position above the boiler and hang the bag on that to allow it to drain.
The bag is strong enough to take a large grain bill when wet, which could easily be 15Kgs
I use one of these bags myself for a wide range of beers. The quality of the materials and of the stitching is superb.